TB 9-3470-209-30
4.
Installation--Continued
ing strap (7550588-3) in accordance
in. countersunk head machine screws
(MS35338-43), and four #10 hex nuts
(5) Secure welding electrode
(MS35649-202).
Follow steps (1) thru (18) below
taining strap (7550588-4) in accordance
for equipment installation in unit 1.
locations and dimensions.
(6) Secure two oxygen cylinders
(1) Position 60-in. and 72-in.
(fig. 2),
using two 92-in.
retaining
straps (7550588-7) in accordance with
00-543-7771) in accordance with figures
2 and 3. Mark and drill six 0.39-in.
diameter holes through work table legs
(7) Position two-wheeled hand
and truck floor on aisle side only in
one acetylene cylinder (8120-00-268-
tables to floor of truck using six
3360) and one oxygen cylinder (8120-00-
5/16- x l-in. hex head capscrews
(MS90725-34) and six 5/16-in. flat
Secure tie-wheeled hand truck to
washers (MS27183-11); under truck floor
wooden truck slats, using two 12-in.
use six 5/16-in. lockwashers (MS35338-
45) and six 5/16-in. hex nuts (MS51967-
5).
(8) Position blacksmith's anvil
(5120-00-180-2885) in accordance with
(2) Position welding table (3436-
00-847-3772) in accordance with figures
and drill two 0.50-in. diameter holes
2 and 3. Drill four 0.39-in. diameter
holes through leg bases and truck
smith's anvil to floor, using two 1/2-
floor. Secure welding table to floor,
x 3-1/4-in. hex head capscrews (MS90725-
using four 3/8- x 1-3/8-in. hex head
120) and two 1/2-in. flat washers
capscrews (MS90725-63) and four 3/8-in.
(MS27183-17); under truck floor use two
flat washers (MS27183-13); under truck
1/2-in. lockwshers (MS35338-48) and
floor use four 3/8-in. lockwashers
two 1/2-in. hex nuts (MS51967-14).
(MS35338-46) and four 3/8-in. hex nuts
(MS51967-8).
(9) Position electric portable
(3) Position small parts box
tabletop (60-in. work table) in accord-
template, mark and drill three 0.33-
diameter holes through bottom center
in. diameter holes through tabletop.
line of small parts box and floor.
Secure electric portable bandsaw stand
Secure small parts box to floor, using
to tabletop, using three 5/16- x 2-1/4-
two 3/8- x 1-3/4-in. hex head capscrews
in. hex head capscrews (MS90725-41),
(MS90725-65) and two 3/8-in. flat wash-
three 5/16-in. flat washers (MS27183-
ers (MS90725-13; under truck floor, use
11), three 5/16-in. lockwashers (MS35338-
45), and three 5/16-in. hex nuts (MS51967-
and two 3/8-in. hex nuts (MS51967-8).
5) .
(10) Position portable electric
(4) Secure case for power-driven
(72-in. work table) in accordance with
9