d. Unit 2. Follow steps 1 thru 12
below for equipment installation.
(21) Secure disk sander (5130-OO-
857-8526) to top slat of truck rack
Fabricate the 74-in. support
using 24-in. retaining strap (7550588-
(22) Position utility grinding
(1) Position 74-in. support angle
(11021151-2) on trailer floor in accord-
11-drawer storage cabinet in accordance
for dimensions. Mark and drill thirteen
Using utility grinding machine base as
0.31-in. diameter holes through 74-in.
support angle and trailer floor.
a template, mark and drill three 0.37-
in. diameter holes through n-drawer
Secure 74-in. support angle to trailer
floor with thirteen 5/16- x 1-1/4-in.
storage cabinet top. Secure utility
hex head capscrews (MS90725-35),
grinding machine with three 5/16- x
2.00-in. hex head capscrews (MS90725-
45), and thirteen 5/16-in. hex nuts
40), three 5/16-in. flat washers
(MS27183-11), three 5/16-in. lock-
washers (MS35338-45), and three 5/16-
(2) Stow the six motor vehicle
in. hex nuts (MS51967-5).
(23) Position machinist's vise
in. support angle and front wall of
(5120-00-293-1439) on 11-drawer storage
cabinet top in accordance with dimensions
(3) Position hydraulic jack kit
(5120-00-595-8388) against 74-in.
base as a template, mark and drill four
support angle (11021151-2) and 18
0.50-in. diameter holes through 11-
inches from left side of trailer.
drawer storage cabinet top. Secure
machinist's vise to 11-drawer storage
cabinet top with four 1/2- x 2-3/4-in.
hex head Capscrews (MS90725-118), four
1/2-in. flat washers (MS27183-17), four
(4) Position three oxygen cylinders
four 1/2-inch hex nuts (MS51967-14).
mounting dimensions. Secure oxygen
cylinders to trailer wall and rack with
six 36-in. retaining straps (7550588-4)
tube-pipe fitting kit in accordance
(5) Position mechanic's creeper
truck wall with 72-in. retaining strap
right side wheel well as shown in
(25) Position separator (4940-00-
with two 92-in. retaining straps
242-4100) centered on top slat of truck
rack in accordance with dimension in
(6) Position tool box (5140-01-
template, drill two 0.12-in. diameter
119-2516) on top of trailer left side
pilot holes in slat. Secure separator
bracket to slat with two #14 x 7/8-in.
secure to trailer wall and floor with
round head wood screws (MS35493-102),
two 92-in. retaining straps (7550588-