TB 9-4940-302-30
4.
drawers facing front of shelter.
Installation--Continued
Repeat steps (1) and (2) for mounting
storage cabinets to floor-mounted blind
(4) Position portable tool box
rivet nuts using a support angle (11021151-
4), six 5/16-in. lockwashers (MS35338-
figures 2
and 4
and secure to
storage
45), four 5/16- x 1-in. hex head capscrews
cabinet and floor-mounted strap loop
(MS90725-34), and two 5/16-in. hex head
using a 30-in. retaining strap (7550588-
lag bolts (MS16992-520).
8).
(10) Using two strap loops (MS51939-
(5) Position 14-in. bed indus-
3) as a template, mark and drill four
0.09-in. diameter pilot holes in storage
in front right corner of 280 shelter in
cabinet top in accordance with figure
bracket (7551851) as a template with
2. Secure two strap loops to the
storage cabinet top using four #10 x 1-
the 2-1/2-in. leg on the floor, mark
in. flat head wood screws (MS35492-78).
and drill four 0.28-in. diameter holes
through industrial sewing machine table
(11) Secure portable electric belt
legs, one hole for each leg.
(6) Secure four brackets (7551851)
cabinet using a 30-in. retaining strap
to 14-in. bed industrial sewing machine
(7550588-8) in accordance with figures
2 and 5.
and 5, using four 1/4- x 3-in. hex head
capscrews (MS90725-18), four 9/32-in.
(12) Using a strap loop (MS51939-
flat washers (MS27183-1O), four 1/4-in.
3) as a template, mark and drill two
0.09-in. diameter pilot holes on the
in. hex nuts (MS51967-2).
rear end of the 30-in. bed industrial
sewing machine table in accordance with
(7) Secure 14-in. bed industrial
using two #10 x 3/4-in. flat head wood
sewing machine table to floor-mounted
blind rivet nuts using four 5/16-in.
screws (MS35492-76).
(13) Secure electrical power cable
x 1-1/4-in. hex head capscrews (MS90725-
36).
bed industrial sewing machine using a
(8) Position 30-in. bed indus-
12-in. retaining strap (7550588-6) in
on left side of shelter in accordance
(14) Position two folding legs
(5), (6), and (7) for mounting 30-in.
bed industrial sewing machine to floor-
lengthwise with tabletops facing each
mounted blind rivet nuts using four
brackets (7551851), four 1/4- x 3-in.
4. Place glazier's rule (5210-00-819-
hex head capscrews (MS90725-18), four
7589) between tabletops. Secure fold-
9/32-in. flat washers (MS27183-1O),
ing legs tables to 30-in. bed indus-
four 1/4-in. lockwashers (MS35338-44),
trial sewing machine table legs using
four 1/4-in. hex nuts (MS51967-2), four
two 66-in. retaining straps (7550588-
5/16-in. lockwashers (MS35338-45), and
9).
four 5/16- x 1-1/4-in. hex head cap-
screws (MS90725-36).
(15) Position mounting bracket of
fire extinguisher (4210-00-555-8837) on
(9) Position a storage cabinet
and 4. Mark and drill three 0.22-in.
in accordance with figure 2, with front
diameter holes in bracket and position
8