281), eight 1/4-in. flat washers (MS27183- 9), four 1/4-in.
accordance with figure 18. Secure general purpose first
(17) Position machinist's vise (5120-00-293-
aid kit to front right side wall, using three #10 x 1/2-in.
1439) on top of installed 20-drawer storage cabinet in
countersunk head machine screws (MS35190-271).
accordance with figure 14. Using machinist's vise as a
Reinstall contents of general purpose first aid kit.
template, mark and drill four 0.56-in. diameter holes in
20-drawer storage cabinet top. Secure machinist's vise
(15) Position 10-drawer storage cabinet (7125-
to 20-drawer storage cabinet, using four 1/2- x 1-3/4-in.
00-999-1122), filing cabinet (7110-00-999-1124), and 20-
hex head capscrews (MS90725-114), four 1/2-in. flat
drawer storage cabinet (7125-00-999- 1123) in front left
washers (MS27183-17), four 1/2-in. flat washers
(AN970-8), four 1/2-in. lockwashers (MS35338-48), and
17 over installed 5/16 blind rivet nuts
on IS0-2-1 shelter
four 1/2- in. hex nuts (MS51967-14).
floor in accordance with figure 15 (four holes per
cabinet). Secure cabinets to ISO- 2-1 shelter floor, using
twelve 6/16- x 5/8-in. hex head capscrews (MS90725-31)
and twelve 5/16-in. lockwashers (MS35338- 45).
installation of storage cabinets on ISO-2-
(16) Position portable cylindrical bore honing unit
1 shelter deployed floor.
storage cabinet in accordance with figure 14. Mark and
e. Position 10-drawer storage cabinet, 20-drawer
drill four 0.28-in. diameter holes through portable
storage cabinet, and filing cabinet on left front side of
cylindrical bore honing unit set bottom and 10-drawer
IS0-2-1 shelter deployed floor, using two-wheel hand
storage cabinet top in accordance with figure 14. Secure
portable cylindrical bore honing unit set to 10-drawer
Secure cabinets to deployed floor-mounted 5/16 blind
storage cabinet top, using four 1/4- x 3/4-in. pan head
machine screws (MS35206-
to secure storage cabinets on IS0-2-1 shelter fixed floor.