Position mounting bracket of fire
Secure two cable assemblies
extinguisher (4210-00-555-8837) on right side wall in
(4940-00-479-2976 and 3439-00-682-3460) to work table
using one 72-in. retaining strap (7550588-1) in
0.22-in. diameter holes in mounting bracket. Position
over installed blind rivet nuts in accordance with figure
16. Secure mounting bracket
to wall using three #10
Secure two hose assemblies
1/2in. countersunk machine screws (MS35190-271).
Install fire extinguisher in mounting bracket
retaining strap (7550588-1) in accordance with figure 18
Remove contents of first aid kit
Install two 5/16x 2-31/32in.
Mark and drill three 0.22-in.
diameter holes in the back of first aid kit. Position in
(MS35338-45), and two 5/16-in. hex nuts (tMS51967-5)
into two blind rivet nuts marked "E" in figure 15. Position
installed blind rivet nuts in accordance with figure 16.
tool kit (5180-00699-5273) in left rear corner in
Secure to wall, using three #10 x 1/2in. countersunk
head machine screws (MS35190-271). Install contents
floor, using one 110-in. retaining strap (7550588-10) in
of first aid kit
Secure one padlock (5340-00-
e. Follow steps 1 and 2 below for location of
682-1508) in hasp of 20-drawer cabinet in accordance
equipment when ISO shelter is deployed.
Position work table against wall
Mark and drill four 0.34-in.
in accordance with figure 19. Secure to the floor using
Position table on the left front floor in accordance with
secure the table to the fixed floor
accordance with figure 15. Secure work table to floor
Position tool kit in accordance
using four 5/16x 7/8-in. hex head capscrews (MS90725-
33) and four 5/16in. lockwashers (MS35338-45).