TB 9-4940-319-30
5.
Installation - Continued
d. Follow steps (1) thru (5) below for
(3) Remove hydraulic jack kit (5120-00-
installation of equipment when ISO-2-1 shelter is
595-8388) and metallizing and welding torch outfit (3433-
deployed.
00-880-0512) from left front end of ISO-2-1 shelter and
(1) Remove welding screen (3439-00-
198-8348) from behind work table. Position welding
(4) Remove inert gas shielded arc
screen in accordance with figure 14. Remove portable
position at front end of work table in accordance with
position between welding table and right wall in
(2) Remove body and fender repair tool
(5) Remove band saw (3405-00-517-
0592) and position over blind rivet nuts in deployed floor
on the deployed floor in accordance with figure 14.
in accordance with figure 14. Secure to floor, using the
with figure 13. Reposition hand truck (3920-01-113-
fixed floor location. Position compressor (4310-00-861-
0117) next to welding table. Use the same hex head
9820) on deployed floor in accordance with figure 14.
new position.
14