TB 9-4940-321-30
(2) Refer to table 4 for components to be
3. Location of Equipment--Continued
mounted.
b. Location of equipment to be installed or
(3) Refer to table 7 for components to be
stowed in the ISO-2-1 shelter is referenced in figures 23
fabricated.
c. Refer to table 8 for standard conversion chart.
(1) Refer to table 2 for hardware required for
installation.
Table 1. Mounting Hardware, 280 Shelter
MS/part no
Size and description
Qty
Application
AN970-3
#10 Flat Washer
12
Strap loops, MGDS
attachment
MS3367-1
6.30-in Tiedown Strap
3
Electrical installa-
tion
MS24667-43
5/16-18 UNC-2A Countersunk
12
Lathe mounting plate
Cap-socket Head Machine Screw
x 1-1/2 L
MS27130-A44
5/16-18 UNC Blind Rivet Nut
14
Front and door end
walls
MS27183-12
11/32-in. Flat Washer
22
Storage cabinets to
bench supports,
shelves
MS27183-14
13/32-in. Flat Washer
3
machine
MS27183-18
17/32-in. Flat Washer
12
Engine lathe,
machinist's vise
MS35190-278
#10-24 UNC-2A Countersunk
12
MGDS attachment,
Head Machine Screw x 1-3/4 L
strap loops
MS35190-309
5/16-18 UNC-2A Countersunk
12
Table tops to
Head Machine Screw x 1-3/4 L
bench supports
MS35190-310
5/16-18 UNC-2A Countersunk
6
Table support angles
Head Machine Screw x 2.00 L
to table tops
MS35206-264
#10-24 UNC-2A Pan Head
4
Fire extinguisher
Machine Screw x 5/8 L
bracket
MS35338-43
#10 Lockwasher
16
Strap loops, I1GDS
attachment, fire
extinguisher
3