a. Instructions contained in this bulletin are to
be used as a guide for installation of organizational
the dashboard to avoid drilling into
maintenance light contact repair shop shop equipment
electrical wires, cables, or gages.
Do not drill holes through cross
members or into the frame of 1/4 ton
b. Slight variations to the installation
instructions may be made at the discretion of the officer
If necessary, move the item to be
mounted slightly so that drilled holes
c. Complete lists of items contained in this
will avoid these structures.
shop are found in SC 4940-95-CL-A55.
d. Items not mentioned in this bulletin, that
characteristics, precautions should
may be components of this shop, may be stowed in tool
be taken not to puncture the outer
boxes and drawers or secured in such a manner as to
avoid damage in transit.
or floor of 1/4 ton truck.
underside of body with coating
e. All dimensions,
compound (UNDERCOATING TT-C-
hardware sizes are in inches.
mounting hardware projects through
When entering the 1/4 ton truck, curbside is
at right and roadside is at left.
Location of Equipment
Warnings and Cautions
a. Location of equipment installed or stowed is
All electrically powered tools and
equipment must be grounded prior to
(1) Refer to table 1 for hardware required
When using flammable cleaning
(2) Refer to table 2 for components to be
solvents, extinguish all smoking
materials. Do not use such solvents
in the vicinity of open flame or
(3) Refer to table 3 for components to be
Refer to table 4 for standard conversion