0054 00
TM 1-4920-435-13&P
INSPECTION OF INSTALLED ITEMS
NOTE
During installation of components same hardware should be used so as to maintain original
integrity of shop set.
Figure 1.
Eyewash Station.
1.
Inspect eyewash station bracket (Figure 1, Item 4) for damage. Replace as necessary.
2.
Inspect eyewash station bracket hardware (Figure 1, Item 1 through 3) for rust, cracks and rounded heads.
Replace as necessary.
REMOVAL
1.
If necessary, drain eye and face wash fountain solution IAW with Eyewash Station Owner s Manual.
2.
Remove two bolts (Figure 1, Item 1), two lock washers (Figure 1, Item 2), two lat washers (Figure 1, Item 3),
and eyewash station bracket (Figure 1, Item 4).
INSTALLATION
1.
Position eyewash station bracket (Figure 1, Item 4) by aligning bolt holes with wall inserts.
2.
Install two bolts (Figure 1, Item 1), two lock washers (Figure 1, Item 2), and two lat washers (Figure 1, Item
3).
Torque bolts (Figure 1, Item 1) 160-190 in. lbs.
3.
4.
Mount eyewash station onto eyewash station bracket (Figure 1, Item 4).
5.
If necessary, ill eyewash station with eye and face wash fountain solution IAW Eyewash Station Owner s
Manual.
END OF WORK PACKAGE
0054 00-2