TM 1-4920-440-13&P
0011 00
POSITIONING ECU (A) FOR OPERATIONAL MODE - CONTINUED
NOTE
Mounting hardware is supplied with ECU.
6.
Mount ECU (A) (Figure 5, Item 1) to fold-down panel (Figure 5, Item 2).
7.
Remove three ring bolts from ECU transport location and store in shelter BII box (WP 0002 00, Figure 2, Item
5 or Figure 3, Item 6).
8.
Item 5 or Figure 3, Item 6) and install into empty loor inserts (WP 0047 00, Figure 2).
POSITIONING ECU (B) FOR OPERATIONAL MODE
WARNING
A four man lift is required when moving or lifting ECUs. Each unit weighs approximately 270
pounds. Trying to move or lift an ECU without suficient help can cause SERIOUS INJURY to
personnel.
NOTE
There are several ECU conigurations compatible for this shop set. Refer to you shop s
Applicable ECU Owner s Manual for operating and maintenance instruction.
Figure 6.
Unsecure ECU (B).
0011 00-5