TM 1-4920-440-13&P
FIELD MAINTENANCE
PRODUCTION/QUALITY CONTROL SHOP
MAINTENANCE INSTRUCTIONS FOR FIRE EXTINGUISHER BRACKETS AND HARDWARE
INITIAL SETUP:
Personnel Required
Tools and Special Tools
CMF 15 Series (1)
General Mechanics Tool Kit
Equipment Condition
Fire Extinguisher Removed
NOTE
During installation of components, same hardware should be used so as to maintain original
integrity of shop set.
INSPECTION OF INSTALLED ITEMS
Figure 1.
Fire Extinguisher Bracket.
1.
Inspect ire extinguisher bracket (Figure 1) for damage. Replace as necessary.
2.
Inspect all ire extinguisher bracket hardware (Figure 1, Item 2, 3, and 4) for rust cracks and rounded heads.
Replace as necessary.
REMOVAL
Remove two bolts (Figure 1, Item 4), two lock washers (Figure 1, Item 3), and two lat washers (Figure 1, Item 2).
0054 00-1