TM 1-4920-441-13&P
0026 00
POSITIONING THREE DRAWER CABINET (G) AND SIX DRAWER
CABINET (H) FOR TRANSPORT MODE - CONTINUED
CAUTION
Do not use installed equipment as lifting points to relocate cabinet.
NOTE
This cabinet assembly is identiied as three drawer cabinet (G) and six drawer cabinet (H) for
the 1036058 coniguration. For the SC4920-99- CLA69 coniguration, the three drawer cabinet
is identiied as three drawer cabinet (F) and the six drawer cabinet is identiied as six drawer
cabinet (G). The assemblies are identical in design and moving procedures.
1.
Remove four setscrews from transport mode location loor inserts and store in shelter BII box.
2.
Remove four bolts (Figure 1, Item 4), four lock washers (Figure 1, Item 5), and four lat washers (Figure 1,
Item 6) from storage location.
3.
Position three drawer cabinet (G) (Figure 1, Item 1) and six drawer cabinet (H) (Figure 1, Item 2) at transport
location.
4.
Align two cabinet brackets (Figure 1, Item 3) with loor inserts at three drawer cabinet (G) (Figure 1, Item 1)
and six drawer cabinet (H) (Figure 1, Item 2) transport location.
5.
Inspect four bolts (Figure 1, Item 4) for thread damage or rounded heads.
6.
Replace bolts (Figure 1, Item 4) if damage is detected.
7.
Install four bolts (Figure 1, Item 4), four lock washers (Figure 1, Item 5), and four lat washers (Figure 1, Item
6) securing two brackets (Figure 1, Item 3) to shelter loor.
Torque bolts (Figure 1, Item 4) 160-190 in. lbs.
8.
END OF WORK PACKAGE
0026 00-3/4 blank