3-23. Fixed Equipment/Components - Removal/Installation (Cont)
3. REMOVE/INSTALL CABINETS.
Permanently installed cabinets should not ordinarily be removed or relo-
cated. However, in the event that it becomes necessary to remove,
reinstall or replace cabinets within the shelter, care must be taken to
remove all bolts, lockwashers, washers and nuts and save them for
reuse. Cabinets are bolted to the floor, wall, and adjacent cabinets.
Four cabinet styles are installed throughout the shop sets and may be
complexed in various configurations. All mounting holes are universal
and cabinets may be substituted for others without special mounting
Remove fixed equipment and bench tops as re-
Remove all bolts (1), lockwashers (2) and washers
(3) from cabinets. Remove cabinets (4).
Reposition cabinets (4).
Install bolts (1), lockwashers (2) and washers (3).
END OF TASK