3-16. Fixtures - Air Feed Thru Connector- Inspect
This tasks covers: Inspection of connector
76C Shop Stock Clerk
INSPECT AIR FEED THRU CONNECTOR
1. Remove dust cap (1) or quick disconnect (2) from
connector (3) at exterior service panel.
2. Inspect condition of connector threads (4). Inspect
connector weld (5) for cracks or breaks. Replace
IAW Task 3-17, if defective.
3. Install quick disconnect (2) as necessary.
4. Ensure dust cap (1) is installed when quick discon-
nect is not connected.
END OF TASK