Six people are required to lift and move main box assembly.
Contents must be removed from Main Box prior to disassembly.
4. Slide container (8) towards rear of vehicle and allow it to protrude enough to gain access to the mounting
5. Replace mounting bar (9) by sliding old bar out and sliding new bar in.
6. Slide container back into vehicle and reinstall all mounting hardware (1 through 6) ensuring spacer (7) is
placed between main box and HMMWV.
7. Re-Install rear cab curtain. Do not tighten until main box is installed. Follow instructions contained in TM 9-
End Of Work Package