Fall hazards that may cause injury or death exist when climbing onto, returning from or
working from the top of the container. Always maintain three points of contact (two feet
and one hand, or one hand and two feet) with the folding steps and roof access handle
when climbing onto the ASLMS container. All movement should be in the forward
direction. Never move, step, or walk backward when working on top of the system. A fall
can occur if a worker loses concentration and steps backward off the edge. Stand erect
only if necessary, and only away from the edge. Working from a kneeling position helps
reduce the threat of a fall. Access to roof by forklift or other MHE is forbidden.
Return to the roof via the roof access system located on the roller end of the FPU-8 to tighten the
upper horizontal interconnectors.
In a kneeling position, orient Bridge Lock so that jaws are turned towards the installer and jam nut is
to the installer's right. Positioning the jam nut to the installer's right will ensure that the installer is
pulling when tightening the adjuster and jam nuts.
Always orient the jam nut to the installer's right to ensure that installer is always pulling
toward himself or herself in a safe manner. Improper orientation may result in installer
falling from the container roof, causing serious injury or death.
Turn the jam nut counterclockwise so that it is positioned close to the adjuster nut.
Expand/retract adjuster nut until jaws fit into opening at the top of the ISO connector.