AUTHORIZED STOCKAGE LIST MOBILITY SYSTEM (ASLMS)
MODEL NUMBER FPU-8/12 PARTS (OD) P/N 15005002-001
MODEL NUMBER FPU-8/12 PARTS (DS) P/N 15005002-002
MODEL NUMBER FPU-8/12 BULK (OD) P/N 15005001-001
MODEL NUMBER FPU-8/12 BULK (DS) P/N 15005001-002
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INTRODUCTION
INTRODUCTION TO PREVENTIVE MAINTENANCE CHECKS & SERVICES (PMCS)
Preventive Maintenance Checks and Services (PMCS) are performed to keep the ASLMS containers in
good operating condition. These checks aid in finding, correcting, or reporting problems. Operator
personnel are to perform the PMCS tasks as shown in the PMCS table.
Do PMCS procedures each day the ASLMS is in operation, using the PMCS table in WP 0016 00. There
are different intervals to perform PMCS procedures: before, during and after using the equipment, as well
as weekly and monthly. Look at the table carefully to identify the required PMCS interval.
Perform all checks and services keeping in mind the following guidelines:
Before you begin using the ASLMS, do Before Operation PMCS
While the ASLMS is in use, do During Operation PMCS
After using the ASLMS, do After Operation PMCS
If you find something wrong when performing PMCS, fix it using troubleshooting and/or maintenance
procedures. Pay attention to WARNING and CAUTION statements. A WARNING means someone could
be injured or killed. A CAUTION means equipment could be damaged.
The far right-hand column of the PMCS table lists conditions that make the ASLMS not fully mission
capable. Write down the problem that cannot be repaired at your level on DA Form 2404 and forward for
unit maintenance. For further information on how to use this form, see DA PAM 738-750.
If tools that are required to perform PMCS are not listed in the procedures, notify your supervisor.
Look for signs of trouble. Use your senses to feel, smell, hear, or see problems that may exist. Inspect to
see if items are in good condition. Are components correctly installed and secured? Is any damage to
the frame or components visible? Correct any faults or notify Unit Maintenance.