1. Remove modules/pallets/drawers as necessary to gain access to the step nuts (2).
With one person in the container and one person outside, remove the mounting bolts (3), washers
and nuts with a 1/2-inch socket and a 1/2-inch open-end wrench.
Apply locktite to the step bolt threads feed bolts through the steps and the mounting holes on the
Apply sikaflex sealant to the area around the bolt (from the inside of the container) and install
washers and nuts (4, 2).
Using a 1/2-inch socket and a 1/2-inch open-end wrench tighten nuts (2) and bolts (3).
END OF WORK PACKAGE