TM 5-3610-256-14
Table 5-1. General Support Troubleshooting
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. START CIRCUIT NOT ENERGIZED.
Step 1.
Step 2.
Opens or shorts in wiring harness.
Repair wiring harness (see paragraph 5-6).
Defective autotransformer.
Replace autotransformer (see paragraph 5-11).
2. EXCESSIVE AMMONIA ODOR.
Step 1. Inspect ammonia pump/motor for leakage.
Repair pump (see paragraph 5-7).
Step 2. Observe ammonia bubbles in supply.
Repair pump (see paragraph 5-7).
3. PRINTS STALL IN DEVELOPER.
Step 1. Inspect screen.
Replace defective screen (see paragraph 5-10).
Step 2. Inspect polyester pick-offs.
Replace defective polyester pick-offs (see paragraph 5-10).
5-2