TM 5-3610-256-14
e. Disconnect thermoswitch. Remove the temperature probe (1) by sliding the developer tank back
and removing screws (2).
f. Remove bracket (3) by removing screws (4).
g. Remove the thermoswitch (5) by removing screws (6) lockwashers (7), and washers (8).
h. Replace thermomswitch (5) and secure with screws (6), Iockwashers (7), and washers (8).
i. Reinstall the temperature probe (1) in the developer tank and secure with screws (2). Re-
connect connectors to thermoswitch.
j. Plug in power cord.
k. Power ON. Allow 20 minutes for the machine to warm up.
Use caution when inserting thermometer into developer
tank to avoid damaging screen.
5-9