TM 5-3610-256-14
Table 3-3. Organizational Troubleshooting (Continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4.
POOR QUALITY PRINTS OF CLEAR ORIGINAL (CONTINUED).
Step 6. Inspect chain.
Lubricate as required (see Table 3-1, item 2). Refer to next higher
level of maintenance for repair.
Step 7. Inspect thermoswitch.
Refer to next higher level of maintenance for repair.
Step 8. Inspect bearings.
Lubricate as required (see Table 3-1, item 1).
5.
NOTICEABLE AMMONIA FUMES.
Step 1. Inspect absorber solution for blue tint.
Replace absorber (see Table 3-2).
Step 2. Inspect for loose ammonia stopper.
Secure stopper (see Table 3-2).
Step 3. Inspect condensation bottle.
Remove condensed ammonia (see paragraph 3-20).
3-33