p. Reinstall exhaust blower bracket on studs.
Reinstall cylinder exhaust blower on left end of machine.
Reinstall wing nuts.
Reconnect motor connector.
Reconnect right lamp connector.
u. Reinstall wing nut on right lamp assembly.
v. ReinstalI right and left covers and turn captive screws.
w. Plug in power cord.
x. Power on.
y. Perform operational test.
3-19. REPLACE FUSES.
SUPPLIES: 10 amp Main Fuse-
MDL 0.8 Drive Fuse
Unplug power cord before servicing machine.
result from failure to comply with this warning.
a. Power OFF.
b. Unplug power cord.
c. Remove main fuse (1) and drive fuse (2).
d. Replace defective fuse(s).
e. Plug in power cord.
f. Power ON.
g. Perform operational test.
Death or injury may