OPERATING AND ORGANIZATIONAL MAINTENANCE INSTRUCTIONS
Section 1. OPERATOR AND ORGANIZATIONAL MAINTENANCE TOOLS AND
for the shop set fire listed in the basic issue itcms
29. Special Tools and Equipment
list, appendix III of this manual.
No special tools or equipment arc required by the
operator or organizational maintenance personnel
for the maintenance of this shop set.
31. Organizational Maintenance Repair Parts
30. Basic Issue Tools and Equipment
The organizational maintcnance repair parts are
listed and illustrated in TM 5-4940-200-20P.
Tools and repair parts issued with or authorized
33. Detailed Lubrication Information
32. General Lubrication Information
a. This section contains a reproduction of the
ment . Keep all Iubricants in closed containers and
lubrication order and lubrication instructions which
store in a clean, dry area away from heat. Do not
allow dirt, dust, water, or other foreign material to
are supplemental to, and not specifically covered in
the lubrication order.
lubrication equipment clean and ready for U Se.
b. Points of Application. Follow the detailed
b. The lubrication order shown in figure 19 is an
lubrication instructions given beneath each lubrica-
exact reproduction] of the approved lubrication order
tion point illustration, indicating procedures to be
for the shop set, For the current lubrication order,
followed at each point. Apply the lubricant indi-
cated on the lubrication order.
refer to DA Pam 3104,