Figure 78. Fuel tank filler tube, removal and installation.
('2) Refer to figure 79 and remove the splash
120. Taillight Bracket
shield spring and bracket from the shop set
a. Removal. Refer to
figure 81 and remove the
body.
taillight bracket from the truck chassis.
h. Cleaning and Inspection.
b. Cleaning and Inspection.
(1) Clean all metal parts with an approval
(1) Clean all parts with an approved cleaning
cleaning solvent and dry thoroughly.
solvent and dry thoroughly.
(2) Inspect the taillight bracket for dents and
(2) Inspect the splash shield spring for wear
cracks. Replace a damaged taillight bracket.
a n d the bracket for dents and cracks.
C. Installation.
Replace worn or damaged parts.
taillight bracket to the truck chassis.
c. Installation,
(1) Refer to figure 79 and install the splash
121. Front Turn Signal Lamp Assemblies,
field spring and bracket.
Model CMU-5
a. Removal. Refer to figure 82 and remove the
front turn signal lamp assemblies from the shop set.
119. Horn Bracket
b. Disassembly. Refer to figure 83 and disassembly
a. Removal. Refer to
figure 80 and remove the
the front turn signal lamp assemblies.
horn bracket from the truck body.
c. Cleaning, Inspection, and Repair.
( 1 ) Clean metal and glass parts with an
b. Cleaning and Inspection.
approved cleaning solvent and dry
(1) Clean the parts with an approved cleaning
thoroughly.
solvent and dry thoroughly.
(2) Inspect the body and lenses for dents,
(2) Inspect the horn bracket for dents and
cracks, and chips.
cracks. Replace a damaged horn bracket.
(3) Inspect the electrical wire for frayed, worn,
c. Installation. Refer to figure 80 and install the
or broken places. Replace all damage
horn bracket to the truck body.
parts.
TAG0 5672-4
101