d. Reassembly. Refer to figure 83 and reassemble
the front turn signal lamp assemblies.
c. Installation. Refer to figure 82 and install the
front turn signal lamp assemblies.
--
122. Rear Turn Signal Lamp Assemblies,
Model CMU-5
a. Removal, Refer to figure 84 and remove the
rear turn signal lamp assemblies from the shop set.
b, Disassembly. Refer to figure 85 and disassembly
the rear turn signal lamp assemblies.
c. Cleaning, Inspection, and Repair.
(1) Clean metal and glass parts with an
approved cleaning solvent a n d d r y
thoroughly.
(2) Inspect the body and lenses for dents,
cracks, and chips.
(3) Inspect the electrical wire for frayed, worn,
or broken places. Replace all damaged
parts.
d. Reassembly. Refer to
figure 85 and reassemble
the rear turn signal lamp assemblies.
e. Installation. Refer to figure 84 and install the
rear turn signal lamp assemblies.
123. Directional Light Control and Flasher,
Model CMU-5
a. Remova/. Refer to figure 86 and remove the
directional light control and flasher from the shop
set.
b. Disassembly. Refer to
figure 87 and disassemble
the directional light control.
c. Cleaning, Inspection, and Repair.
(1) Clean all metal parts with an approved
cleaning solvent and dry thoroughly.
(2) Inspect all metal parts for cracks, breaks,
or other damage.
(3) Inspect the wiring assemblies for breaks
and frayed insulation.
(4) Inspect the hardware for damaged threads.
(5) Replace all defective parts.
d. Reassembly. Refer to
figure 87 and reassemble
the directional light control and flasher.
e. Installation. Refer to figure 86 and install the
directional light control and flasher.
TACO 5672-A