ORGANIZATIONAL MAINTENANCE INSTRUCTIONS
Section I. SERVICE UPON RECEIPT OF EQUIPMENT
4-1. Servicing of
Equipment
for servicing of equipment.
Section Il. MOVEMENT TO A NEW WORKSITE
for movement to a new worksite.
4-2. Instructions for Movement
Section III. REPAIR PARTS, SPECIAL TOOLS, AND EQUIPMENT
No special tools and equipment are required by
4-3. Basic Issue Tools and Equipment
organizational maintenance on the shop set.
Tools, equipment, and repair parts issued with or
authorized for the shop set are listed in the basic
Organizational maintenance repair parts will be
listed and illustrated in TM 5-4940-225-20P.
4 - 4 . Special Tools and Equipment
Section IV. LUBRICATION INSTRUCTIONS
lubrication instructions.
4-6. General Lubrication Information
Refer to LO 5-4940-219-12 for complete
Section V. PREVENTIVE MAINTENANCE CHECKS AND
SERVICES (MONTHLY AND QUARTERLY)
4-8. Daily Preventive Maintenance Checks and
Services
To insure that the shop set is ready for operation at
This paragraph contains an illustrated tabulated
all times, it must be inspected systematically so that
listing of preventive m a i n t e n a n c e checks and
defects may be discovered and corrected before
services which must be performed by the operator.
they result in serious damage or failure. The
The item numbers are listed consecutively and
n e c e s s a r y preventive maintenance checks and
indicate the sequence of minimum requirements.
services to be performed are Iisted and described in
maintenance checks and services.
the sequence of minim urn inspection requirements.
Defects discovered during operation of the unit
4-9. Quarterly Preventive Maintenance Checks
shall be noted for future correction to be made as
and Services
soon as operation has ceased. Stop operation im-
a . This paragraph contains an illustrated
mediately if a deficiency is noted during operation
tabulated listing of preventive maintenance checks
which would damage the equipment if operations
and services which must be performed by
were continued. All deficiencies and short comings
Organizational Maintenance Personnel at quarterly
will be recorded together with the corrective action
intervals. A quarterly interval is equal to three (3)
taken on DA Form 2404 at the earliest possible
c a l e n d a r months, or 250 hours of operation,
opportunity.
whichever comes first.