TM 55-4920-212-15
g. Can Storage Rack. The can storage is located
of shop set.
immediately aft of the forward storage compartment (fig.
c. Inspection Kit, Fluorescent, Portable. This kit is
mounted at the top center of the forward wall of the shop
h. Buckets, 14-quart, General Purpose.
The
buckets are mounted on the left side of the front storage
and 38. Straps and loops for mounting other equipment
compartment (fig. 23). Tiedown straps are shown in
d. inspection Kit, Fluorescent. This kit is mounted
i. Hose Racks. Racks for storing the hose are
at the center of the right side of the shop (fig. 23).
located in the forward storage compartment, right side
through 44.
j. Portable Grinder Mounting. The mounting for
e. Inspection Kit, Magnetic Particle, Stationary.
the portable grinder is located on the type V storage
This kit is mounted at the center of left side of the shop
cabinet (fig. 23). Detail of the mounting is shown in
35, 38, 39, and 45
through 50.
k. Water System.
The water system (figs. 20-22)
f. Inspection Kit, Magnetic Particle, Portable. This
is mounted on the right side of the shop (figs. 23 and
kit is mounted at the rear on the left of the shop.
24). Components and mounting details are shown in
and 53.
l. Storage Cabinets, Type V, The storage cabinet
is mounted at the left rear of the shop (fig. 23). Typical
forward platform of the shop (fig. 23). Mounting details
are shown in figure 65. The air tank for the compressor
is mounted underneath the forward floor of the shop
Figure 34. Inspection kit guide angles.
Figure 35. Tiedown strap, continuous type.
56