TM 9-4933-223-13&P
a. Arbor Press and Grinding Machine. The arbor press and grinding
b. Cable Adapter Assembly and 120/208V Cable Assemblies. A cable
machine are permanently attached to the right table. This equipment is
adapter assembly and two 120/208V cable assemblies are furnished to
used to perform many standard machine shop practices. The arbor press is
connect the shop set to the power source. The cable adapter assembly is
hand-operated; the grinding machine is motor driven.
connected to the power distribution panel. Then the 120/208V cable
assemblies are connected between the cable adapter assembly and the
power input panel on the exterior of the shelter. During stowed conditions,
the cable adapter assembly and 120/208V cable assemblies are coiled and
strapped to the floor between the ECU and the cargo door.
1-5