Inspect for bent,
broken, or missing
Check for secure
3-7. INSTALLATION INSTRUCTIONS
3-6. CHECKING UNPACKED EQUIPMENT
a. Stowed Components of Shop Set. Refer to chapter 2 for installation
a. Inspect the equipment for damage incurred during shipment
instructions for placing stowed components of shop set into operating mode.
the equipment has been damaged, report the damage on SF 364, Report of
b. Components on Installed Equipment List. Place all items (which are
small hand tools or components of hand tools) listed on installed equipment
b. Check the equipment against the packing slip to see if the shipment
list (SC 4933-95-CL-A21) in storage areas. These areas include table
is complete. Report all discrepancies in accordance with the instructions of
drawers, equipment storage chest, and storage cabinet.
c. Check to see whether the equipment has been modified.
Section III. TROUBLESHOOTING
troubleshooting table where a test or inspection and corrective action are
3-8 TROUBLESHOOTING INFORMATION
a. The symptom index can be used as a quick guide to
troubleshooting. Common malfunctions are listed in alphabetical order with a
page number reference to the