3-13. SHOP SET--INSTALLED EQUIPMENT LIST--MAINTENANCE INSTRUCTIONS (cont)
MODIFICATION OF STORAGE CABINET AND PORTABLE DEGREASER (cont)
STORAGE CABINET (2).
a. Place in mounting frame (3).
b. Mark locations (two in storage cabinet
back, one in left side, and one in
When new, portable degreaser
right side) of mounting holes using
comes in two sections, the tank
mounting frame (3) as a template.
section and mounting legs section.
Steps 6 thru 10 are instructions for
c. Remove storage
permanently attaching these two
mounting frame (3).
d. Drill four 0.438-in.
diameter holes at marked locations.
TANK SECTION (4) AND MOUNTING LEGS SECTION (5). Assemble to form portable
Do not pierce tank when drilling through flange.
PORTABLE DEGREASER (6). Drill ten 0.250-in. (0.635-
cm) diameter holes
through flange (two holes in each end, three holes in front, and three holes in back) as
NUTS (9). Install.