13-14. SHOP SET--CEILING MODIFICATION--MAINTENANCE INSTRUCTIONS (cont)
MODIFICATION OF CEILING (cont)
HONEYCOMB CELL WALL (4).
through if it falls between 0.375-in. (0.953-
cm) diameter holes and 0.125-in. (0.318-
cm) diameter holes
c. Drill thirty 0.125-in.diameter holes (3)
through inside skin of ceiling, one on
each side of the fifteen (0.375-in.)
diameter holes (2) as illustrated.
Dry cleaning solvent (SD) is
Clean blind inserts just prior to installation and handle
flammable and should not be used
only when wearing gloves (item 9, app D).
near open flame or in a smoking
area. Use only in well ventilated
areas. This solvent evaporates
Steps 1 thru 3 pertain to only one blind insert. Repeat
quickly and has a drying effect on the
procedures as required for additional blind inserts.
skin. When used without gloves, it
may cause cracks in the skin and in
some cases mild irritation.