TWO BOLTS (1). If missing, damaged, or corroded, replace
entire holder assembly (2).
FOUR PADS (3) AND PAD (4). Replace, if torn or deteriorated,
a. Straighten bent parts.
b. If not repairable, replace entire first aid kit holder
PAD (1) AND HOLDER (2). Secure together using adhesive (item
2, app D). Pad should be applied to sides and bottom of holder,
centered between the front and back.
FOUR PADS (3). Secure two pads to front of holder (2) and two
pads to back of holder with adhesive (item 2, app D).
PAD (1). Cut two 0.28-in. (0.71-cm) diameter holes (one through
each side) to match bolt holes in sides of holder (2).
Change 1 3-207