TM 9-4933-223-13&P
9.
REAR CONNECTOR HOUSING (15),
SPACER (16), GLAND (17), GRIP
(2), AND GLAND NUT (1). Remove.
10.
BAND (18). Remove from cable (3)
by cutting.
11.
GASKET (19). Remove.
12.
TWO CABLE CLAMP SCREWS (20).
Loosen.
NOTE
Steps 11 thru 23 pertain to
13.
CLAMPING NUT (21).
disassembly of the plug connector.
a. Rotate until notch (22) in
nut is alined with boss (23)
on lower half of body (24).
b. Slide back over cable (3).
3-219