TM 9-4933-223-13&P
REPAIR
NOTE
For initial installation of harness assembly or
replacement of complete harness assembly,
NOTE
Each individual wire section may be repaired
1
SIXTEEN WIRE SECTIONS (1). Repair by fabrication (fig.
or replaced by a like item, refer to wire table
3-2.
2
EIGHT LUG TERMINALS (2) AND THREE LUG
TERMINALS (3). Repair by replacement (app C).
REASSEMBLY
NOTE
The following five procedures are performed if any or all wire sections are
being replaced.
1
BLACK WIRE SECTION NO. 9 (1),
BLACK WIRE SECTION NO. 9 (2),
WHITE WIRE SECTION NO. 10 (3),
WHITE WIRE SECTION NO. 10 (4),
WHITE WIRE SECTION NO. 13 (5),
WHITE WIRE SECTION NO. 13 (6),
RED WIRE SECTION NO. 12 (7), AND
RED WIRE SECTION NO. 12 (8).
Strip insulation (9) back 0.50
in. (1.27 cm) from both ends.
3-259