THREE SCREWS (26). Install.
SPACER (6) AND GLAND (5).
Slide into position at end of rear
Gland nut has left-hand threads
connector housing (7).
and should be tightened by
GRIP (4). Push together
turning in the opposite direction
from that used to tighten
standard right-hand threaded
GLAND NUT (3).
Slide toward rear connector housing (7).
Tighten to a torque level of 35 to 40 lb-ft (47.25 to 54 N-m).
Retorque to same level after approximately 12 hours.