All dimensions shown are in inches. A dimension with a two-digit
decimal has a tolerance of 0.03 in. (0.08 cm) and a three-digit
decimal has a tolerance of 0.005 in. (0.013 cm).
Break all sharp edges and deburr all holes.
Use only type 1.1.1 trichloroethane solvent. Never use
portable degreaser with solvent in it unless ventilation
fan is turned on. Breathing solvent vapors will cause
unconsciousness, prolonged skin contact with solvent will
cause irritation, and taking solvent internally will cause
Degrease with type 1.1.1 trichloroethane (item 1, app D).
Apply one coat primer coating (item 14, app D), followed by two
coats semigloss OD enamel (item 7, app D).
Mark with black stencil marking ink (item 17, app D) as follows.
Change 1 E-19