FLYWHEEL ALTERNATOR STATOR.
a. Testing. Refer
to table 6-1 and check
Wire numbers indicated for probe connections are
for convenience only and are not indicated on the
Black # 1 to Black #- 2
Black # 1 to Engine grid.
Indicates open Circuit
Black # 2 to Engine gnd
Black # 1 to Red
Black # 2 to Red
b. Removal (fig 6-4). Remove four allen
(1) Wipe stator clean with a clean, lint-free cloth.
and washers attaching stator to gear housing cover.
(2) Inspect stator for cracks, broken or loose wire
Remove stator from gear housing.
c. Cleaning and Inspection.
d. Installation. Install in reverse order of removal.