MACHINIST VISE.
a. General. The vise is located on top of the right side work-
bench above the battery charger.
b.
(1) Remove drawer number 13.
(2) Remove four nuts (4), four flatwashers (2), four lock-
washers (3) and four screws (l).
(3) Remove vise.
above.
Install in reverse order of b.
c.
Installation.
3-5. UTILITY GRINDING MACHINE.
a. General. The grinding machine is located on the rear of the
left side workbench.
b.
Removal.
(1) Remove drawer number 15 (fig. 5).
(2) Disconnect electrical connection at conduit
flatwashers (3), and two screws (4) (fig. 6).
(4) Remove grinding machine (fig. 6).
Install in reverse order of b. above.
Installation.
c.