3-9.
THREAD CUTTING TAP SET, ELECTRICAL INSULATION SHEETS,
a.
General. The five components are located under the small parts
cabinet (under the front workbench).
b.
(2) Unfasten four straps (4 & 5) and remove the five compo-
nents.
c. Installation.
Install the components under the workbench
and secure with four straps (4 & 5).
PORTABLE TOOL BOX, TORQUE WRENCH, SOCKET WRENCH SET,
AND GENERAL MECHANIC'S TOOL KIT.
a. General. The components in this paragraph are located in
front of the left and right side workbench.
b.
(1) Unfasten straps (6 & 7) and remove torque wrench and
portable tool box.
(2) Unfasten straps (6 & 8) and remove socket wrench set
and general mechanic's tool kit.
c. Installation.
Install in the reverse order of removal b.
above.
CROWBAR, GROUND ROD, AND WRECKING BAR.
a. General. The three components are mounted near the bottom,
on the inside, of the workbench. They are secured with mounting
straps (one for each).
Unfasten the three straps and remove the
three components.
Install the three components in reverse order of
c. Installation.
removal b. above.