TB 9-3470-209-30
4.
Installation--Continued
(15) Stow portable electric disk
slats and secure with a 24-in. retain-
and drill four 0.33-in. diameter holes
through tabletop. Secure portable
electric grinder to table top, using
(16) Stow two welder's helmets
four 5/16- x 2-1/4-in. hex head capscrews
(MS90725-41), four 5/16-in. flat washers
power cable assemblies (6150-00-682-
3460), metallizing and welding torch
(MS35338-45), and four 5/16-in. hex
nuts (MS51967-5).
fender repair tool kit (5180-00-357-
7731), and two cutting and welding
(11) Position machinist's vise
(5120-00-293-1439) on table top (72-in.
bottom shelf of 60-in. work table and
work table) in accordance with figure
secure with six 92-in. retaining straps
2. Using base as template, mark and
drill four 0.50-in. diameter holes
(17) Vehicle boarding ladder
through tabletop. Secure machinist's
(2540-00-641-0187) is stowed in
vise to tabletop, using four 1/2- x 3-
M35A2 cargo truck frame.
1/4 in. hex head capscrews (MS90725-
120), four 1/2-in. flat washers (MS27183-
(18) Position three argon
48) , and four 1/2-in. hex nuts (MS51967-
against front wall in accordance
14).
argon cylinders to front truck
(12) Position hand lever throat-
slats using two 92-in. retaining
less shearing machine (3445-00-244-
straps (7550588-7).
4527) on tabletop (72-in. work table)
Follow steps (1) thru (9) below
h.
base as template, mark and drill four
for equipment installation in unit 2.
0.33-in. diameter holes through table-
top.
Secure hand lever throatless
locations and dimensions.
shearing machine to tabletop, using
four 5/16- x 2-1/4-in. hex head cap-
(1) Position arc welding machine
screws (MS90725-41), four 5/16-in. flat
(3431-00-903-5647) in accordance with
washers (MS27183-11), four 5/16-in.
lockwashers (MS35338-45), and four
0.39-in. diameter holes through bottom
5/16-in. hex nuts (MS51967-5).
frame of arc welding machine and floor
(13) Stow welding torch outfit
arc welding machine to floor, using
four 3/8- x 3-in. hex head capscrews
(MS90725-70) and four 3/8-in. flat
of 60-in. work table and secure with
washers (MS27183-13); under trailer
three 92-in. retaining straps (7550588-
(MS35338-46) and four 3/8-in. hex nuts
(MS51967-8).
(14) Stow portable electric drill
(2) Secure three acetylene cylin-
shelf of 60-in. work table and stow two
walls, using six 66-in. retaining
straps (7550588-9) in accordance with
and electric portable reciprocating saw
(3) Secure oxygen cylinder (8120-
10