TB 9-4940-332-30
Installation
(6) Position one 3-shelf storage
a. Follow steps (1) thru (11) below
24-drawer storage cabinet on the right
for equipment installation in M35A2
side of truck in accordance with
cargo truck.
(1) Mark and drill four 0.34-in.
(7) Mark and drill four 0.34-in.
diameter holes into bottom plate of
diameter holes through the 3-shelf
storage cabinet(s) without holes.
storage cabinet bottom frame. Using
Locate at the four corners, allowing
the drilled holes in the bottom frame
for minimum required clearance for
as a template, mark and drill four
5/16-in. hex head capscrews.
0.22-in. diameter pilot holes into the
24-drawer storage cabinet wood top.
(2) Position five storage cab-
Secure, using four 5/16- x 1-1/4-in.
inets: two 12-drawer (7125-00-693-
hex head lag bolts (MS16992-521) and
4352), two 24-drawer (7125-00-693-
4353), and one 3-drawer (7125-00-559-
6223), on right side of truck in ac-
(8) Position one 3-shelf storage
12-drawer storage cabinet on the left
CAUTION
side of truck in accordance with
Be sure storage cabinet
drawers adjacent to hole
locations are removed before
(9) Repeat step 7. Secure 3-
shelf storage cabinet to wooden top of
12-drawer storage cabinet, duplicating
(3) Using the holes in the
the hardware listed in step 7.
storage cabinet bottoms as templates,
mark and drill twenty 0.34-in. diameter
(10) Position mounting bracket of
holes through truck floor in accordance
the left,side of previously installed
cabinets to the floor, using twenty
3-shelf storage cabinet in accordance
5/16- x l-in. hex head capscrews
(MS90725-34), twenty 5/16-in. flat
three 0.28-in. diameter holes in bracket.
washers (MS27183-11), twenty 5/16-in.
Secure mounting bracket to wire mesh
lockwashers (MS35338-45), and twenty
wall of 3-shelf storage cabinet, using
5/16-in. hex nuts (MS51967-5).
three 1/4- x 3/4-in. countersunk head
machine screws (MS35190-289), six 1/4-
(4) Position five storage cab-
in. flat washers (AN970-4) (three flat
inets: four 12-drawer (7125-00-693-
washers placed on inside of 3-shelf
4352) and one 3-drawer (7125-00-559-
storage cabinet mesh wall), three 1/4-
6223), on left side of truck in ac-
1/4-in. hex nuts (MS51967-2). Install
fire extinguisher in mounting bracket.
CAUTION
Be sure storage cabinet
(11) Position two extension lights
drawers adjacent to hole
locations are removed
Secure to slat, using two 12-in. re-
taining straps (7550588-6).
(5) Repeat step 3. Secure the
storage cabinets to floor, duplicating
the hardware listed in step 3.