TB 9-4910-745-30
CAUTION
1. General
To preserve waterproof
characteristics, precautions
a. The instructions in this bul-
should be taken not to punc-
letin are to be used only as advice and
ture the outer skin when
guidance for installation of organiza-
drilling holes in walls of
tional maintenance automotive main-
shop. Coat underside of
tenance and repair shop equipment (NSN
vehicle body with coating
4910-00-754-0650) in one M35A2 cargo
compound (UNDERCOATING TT-C-
truck, unit 1, and one M105A2 cargo
520, NSN 8030-00-221-1883)
trailer, unit 2.
where mounting hardware
projects through floor.
b. Slight variations to instal-
lation instructions may be made in
f. All dimensions, fastener sizes,
accordance with FM 55-30 at the dis-
and hardware sizes are in inches.
cretion of the officer in charge.
g. When entering shop, curbside is
c. Complete list of items contained
at right and roadside is at left.
in this shop is found in SC 4910-95-CL-
A72.
WARNING
2. Location of Equipment
All electrically powered
tools and equipment must be
a. Locations of equipment to be in-
grounded prior to use.
stalled or stowed in units 1 and 2 are
referenced in figures 1 thru 14.
CAUTION
Special care should be
b. Refer to table 1 for hardware
exercised to avoid damage to
required for installation.
wiring, or electrical equip-
c. Refer to table 2 for components
ment.
to be mounted.
d. Personnel performing this
d. Refer to table 3 for electrical
installation should have practical
components to be mounted.
knowledge of electricity.
e. Refer to table 4 for drill diam-
e. Items not mentioned in this
eter conversion chart.
bulletin, that may be components of
this shop, may be stowed in cabinets
and drawers or secured in such a manner
as to avoid damage in transit.
1
