TB 9-4940-325-30
4.
Installation
(1) Position six support angles (11021151-
7) on tool box center (110212383) in accordance with
figure 4. Secure support angles to
tool box center,
NOTE
using three 5/16x 2-in. hex head capscrews (MS90725-
Hand blind riveter (512000-679-6523)
40), three 5/16-in. flat washers (MS27183-11), three
is used for installing blind rivet nuts
5/16in. lockwashers (MS35338-45), and three 5/16-in.
in floors, walls, or dashboard of 1/4
hex nuts (MS51967-5).
ton truck. Install blind rivet nuts in
accordance with the technical manual
(2) Position tool box center (11021238-3)
supplied with the hand blind riveter.
and tool box front (110212382) in accordance with figure
4. Secure tool box front to
tool box center, using three
Position floor-mounted first aid kit
#10 x 1-1/2-in. flat head wood screws (MS35492-80).
and fire extinguisher as shown in
Use the equipment
(3) Position
four
support
angles
mounting holes as template for
(11021151-5) on tool box front (110212382) in
location of blind rivet nuts in
accordance with figure 4. Secure support angles, using
eight 5/16x 13/4-in. hex head capscrews (MS9072539),
eight 5/16-in. flat washers (MS2718311), eight 5/16-in.
a. Follow steps (1) and (2) below for installing
blind rivet nuts.
(MS519675).
(1) Mark and drill ten 0.25-in. diameter
(4) Position tool box center (11021238-3)
holes in floor of 1/4 ton truck in accordance with figure 3.
and tool box front (11021238-2) over eight installed blind
Install ten #10 blind rivet nuts (MS27130-A21).
rivet nuts on floor of 1/4 ton truck in accordance with
figure 3. Secure tool box center and tool box front, using
(2) Mark and drill thirteen 0.42in. diameter
eight 5/16x 1-1/8-in. hex head capscrews (MS90725-35)
holes in floor and dashboard of 1/4 ton truck in
and eight 5/16-in. lockwashers (MS35338-45).
accordance with figure 3. Install thirteen 5/16in. blind
rivet nuts (MS27130-A44).
(5) Position tool box top (110212381) on
tool box center (11021238-3) in accordance with figure 4.
b. Follow steps (1)
thru
(8)
below
for
Secure tool box top, using six 5/16x 1-1/2-in.
fabricated items installation.
countersunk head machine screws (MS35190308), six
nuts (MS519675).
NOTE
(6) Position four butt hinges (MS27968-
dimensions of components to be
16) on hinged drop lid (110212384-B) and hinged top lid
fabricated and to table 3 for quantity
(11021238-4-A) in accordance with figure 8. Using butt
needed.
hinges as templates, mark and drill eighteen 0.12-in.
diameter pilot holes.
All wood parts are to be made from
3/4-in. exterior plywood, group B, PS-
1, Type C, in accordance with
specification NN-P-530.
Support
angles are to meet dimensions
6