0008 00
TM 1-4920-433-13&P
OPENING ECU FOLD-DOWN PANELS - CONTINUED
NOTE
ECU fold-down panel must be at an angle of approximately 91 degrees in order for water to
properly drain.
Figure 6.
Installing T-Seal.
5.
Remove T-seal (Figure 6, Item 3) (WP 0067 00, Figure 2, Item 25) from Shelter BII box.
NOTE
T-seal must be positioned with metal strip against ECU security screen.
6.
Insert T-seal (Figure 6, Item 3) into gap (Figure 6, Item 4) located between ECU fold-down panel (Figure 6,
Item 1) and ECU security screen (Figure 6, Item 2).
7.
Repeat Steps 1 through 6 for opposite ECU fold-down panel (Figure 6, Item 1).
END OF WORK PACKAGE
0008 00-6