0024 00
TM 1-4920-433-13&P
POSITIONING SHELF CABINET (E) FOR TRANSPORT MODE - CONTINUED
CAUTION
Do not use installed equipment as lifting points to relocate cabinet.
1.
Remove four setscrews from shelf cabinet (E) and (F) transport location loor inserts and store in cotton
mailing bag located in shelter BII box .
2.
Remove four bolts (Figure 1, Item 2), four lock washers (Figure 1, Item 3), and four lat washers (Figure 1,
Item 4) from cotton mailing bag located in shelter BII box.
3.
Position cabinet (E) and (F) (Figure 1, Item 1) at transport location.
4.
Align two cabinet brackets (Figure 1, Item 5) with loor inserts at cabinet (E) and (F) transport location.
5.
Inspect four bolts (Figure 1, Item 2) for thread damage or rounded heads.
6.
Replace bolts (Figure 1, Item 2) if damage is detected.
7.
Install four bolts (Figure 1, Item 2), four lock washers (Figure 1, Item 3), and four lat washers (Figure 1, Item
4) securing two brackets (Figure 1, Item 5) to shelter loor.
Torque bolts 160-190 in. lbs.
8.
END OF WORK PACKAGE
0024 00-2
