0047 00
TM 1-4920-436-13&P
REPAIR OR REPLACEMENT CONTINUED
ECU POWER CABLE CONTINUED
7.
Pull ECU power cable (Figure 3, Item 1) through box connector and tighten compression nut after ECU power
cable (Figure 3, Item 1) has been positioned with length (approximately 36 inches) of wire.
8.
Attach ECU power cable (Figure 3, Item 1) wires to circuit breaker with neutral and ground wires to corre-
sponding terminal strip.
9.
Replace circuit breaker panel board and cover onto circuit breaker box.
10. Move main circuit breaker to the ON position.
0047 00-6
