TM 1-4920-440-13&P
0001 00
SAFETY, CARE, AND HANDLING CONTINUED
7.
Prior to removing load balancer from ixed roof, the hinged loor must be near stowed position to remove
tension from support cable. The support cable bracket on hinged loor must then be removed to permit
disconnecting support cable from hinged loor. Secure hinged loor to prevent accidental release.
8. Do not attempt to disassemble or repair load balancer. This equipment contains powerful torsion springs
and serious injury or death to personnel could result if disassembled.
9. In extreme cold, do not touch metal parts with bare hands because severe skin damage may result.
10. Eye protection shall be worn by personnel when installing ground anchors.
11. Prior to operating or performing procedures that involve the air compressor or degreaser, refer to the
manufacturer s manual provided for all warnings and cautions.
SUPPORTING INFORMATION FOR REPAIR PARTS, SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
COMMON TOOLS AND EQUIPMENT
For authorized common tools and equipment, refer to the Modiied Table of Organization and Equipment
(MTOE) CTA50-970, Expendable/Durable Items (Except: Medical, Class V, Repair Parts, and Heraldic Items),
CTA50-909, Field and Garrison Furnishings and Equipment or CTA8-100, Army Medical Department Expend-
able/Durable Items, as applicable to your unit.
SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
There are no special tools or support equipment required to perform maintenance procedures detailed within this
manual.
REPAIR PARTS
Repair parts are listed and illustrated in parts information WP 0065 00 of this manual.
EXPENDABLE AND DURABLE ITEMS
Expendable and durable items are listed in WP 0069 00 of this manual.
0001 00-5/6 blank
