TM 1-4920-440-13&P
0022 00
POSITIONING TYPIST DESK FOR TRANSPORT MODE - CONTINUED
1.
Remove four setscrews from typist desk transport location loor inserts and store in shelter BII box
(WP 0002 00, Figure 2, Item 5 or Figure 3, Item 6).
2.
Position typist desk (Figure 1, Item 1) to transport location.
3.
Install two bolts (Figure 1, Item 2), two lock washers (Figure 1, Item 3), and two lat washers (Figure 1, Item
4) into right rear and left front leg brackets (Figure 1, Item 5) and attach to shelter loor.
4.
Install two bolts (Figure 1, Item 2), two lock washers (Figure 1, Item 3), and two lat washers (Figure 1, Item
4) into right front and left rear leg brackets (Figure 1, Item 6) and attach to shelter loor.
Torque bolts (Figure 1, Item 2) 160-190 in. lbs..
5.
END OF WORK PACKAGE
0022 00-3/4 blank
