TM 1-4920-440-13&P
0053 00
INSPECTION OF INSTALLED ITEMS
Air Feed-thru Connector Assembly
Figure 7.
Air Feed-thru Connector Assembly.
1.
Inspect condition of threads on both ends of air feed-thru connector assembly (Figure 7, Item 1).
2.
Replace air feed-thru connector assembly (Figure 7, Item 1) if damage is detected.
3.
Ensure that protective dust caps (Figure 7, Item 2) are attached.
4.
Ensure weld on connector is not cracked or broken.
5.
Replace air feed-thru connector assembly (Figure 7, Item 1) if damage is detected.
REMOVAL
Air Feed-thru Connector Assembly
Figure 8.
Air Feed-thru Connector Assembly.
1.
Have an assistant hold nut (Figure 8, Item 4) and washer (Figure 8, Item 2) inside shelter.
2.
Remove three nuts (Figure 8, Item 4), three lat washers (Figure 8, Item 2), three lock washers (Figure 8, Item
3) and three screws (Figure 8, Item 1), releasing air feed-thru connector assembly (Figure 8, Item 5).
0053 00-5