0007 00
TM 1-4920-441-13&P
INSTALLING CABLE AND RECEPTACLE ASSEMBLY
Figure 4.
Installing Cable and Receptacle Assembly.
1.
Release captive fasteners (Figure 4, Item 1) from receptacles (Figure 4, Item 3) on one end of shelter.
2.
Remove receptacles (Figure 4, Item 3) from transport location on hinged end wall to operating position on
hinged sidewall.
3.
Install receptacles (Figure 4, Item 3) with power cables facing up and secure captive fasteners (Figure 4,
Item 1).
4.
Secure power cable with Velcro straps (Figure 4, Item 2).
5.
Repeat Steps 1 through 4 for receptacles at other end of shelter.
0007 00-4